Metrohm 915 KF Ti-Touch - Manual (Page 142)

13.4 System validation
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
128 ￭￭￭￭￭￭￭￭
915 KF Ti-Touch
￭ Tap on the fixed key [ ].
The dialog GLP manager / System validation appears again.
5 Insert a note
￭ Tap on [Note (SOP)].
￭ Enter a brief description, e.g. a summary of the SOP (standard
operating procedure) according to which the system validation
was carried out (see "Dialog "System validation / Note (SOP)"",
page 129).
￭ Tap on the fixed key [ ].
13.4.1 Parameter description
Dialog "GLP manager / System validation"
Method
Method with which the system validation has been carried out.
Entry 32 characters maximum
Selection Selection of methods stored in the internal
memory
User
User who carried out the system validation.
Entry 24 characters maximum
Selection Selection of configured users
Test date
Date on which the system validation was carried out.
Format: YYYY:MM:DD
Test result
Result of the test.
Selection Test OK | Test not OK
Default value Test OK
Comment
Entry 24 characters maximum
[Note (SOP)]
Enter a brief description, e.g. a summary of the SOP (standard operating
procedure) according to which the system validation has been carried out.