Metrohm 915 KF Ti-Touch - Manual (Page 118)

11.7 Printer
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
104 ￭￭￭￭￭￭￭￭
915 KF Ti-Touch
Add or change comments allowed
on | off (Default value: on)
If this option is activated, then comments can be added to the PDF file.
11.7.2 Network printer
Printer: Edit ▶ Network printer
If you have connected your Ti-Touch to your network, then you can spec-
ify a network printer for your reports in this dialog.
NOTE
If you have shared a memory location on a PC within your network and
if you have configured the Ti-Touch accordingly (see Chapter 11.3.3,
page 79), then the settings for the parameters Domain, User and
Password will be applied and can then no longer be modified in this
dialog.
CAUTION
If the computer on which the network printer is configured does not
have the same subnet mask as the Ti-Touch, then a WINS server must
be present. The computer must be entered in this server.
Computer
Host name of the print server or the computer on which the network
printer is configured. If you are working with Windows, then you will find
the host name of the computer as follows: In the Windows command
prompt window, enter the command ipconfig -all. The host name is lis-
ted together with other parameters of the computer.
Do not under any circumstances enter an IP address in this input field.
Entry max. 32 characters
Default value empty
Share name
Share name of the network printer on the above-specified computer.
Please note that the Share name of a network printer often does not
match the name of the printer. The share name can be found on the
Release tab in the Properties dialog of the released network printer.
Entry max. 32 characters
Default value empty