Metrohm 915 KF Ti-Touch - Manual (Page 365)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
31 Appendix
915 KF Ti-Touch
￭￭￭￭￭￭￭￭ 351
31.7.6.1 Carrying out a software update
CAUTION
Make sure that the power supply is guaranteed during the entire
update process. Otherwise there is the chance that the instrument will
no longer be able to be switched on and that it will need to be sent in
for repair.
Proceed as follows:
1 Copying files to an external storage medium
NOTE
In the case of the program versions and language files for the
Ti-Touch, it is imperative that both the BIN file and the associated
MBIN file be copied.
￭ Copy the files to the "SwUpdates" directory.
￭ Copy also the "MetrohmTools" folder with the "MUpdate-
Tool.exe" file to the external storage medium.
Make sure that the file is stored at the top level of the external
storage medium. This also applies to the "915" folder.
If this structure is not maintained, then the files will not be found,
because the directories are accessed directly during the update
process.
￭ Plug in the external storage medium at the Ti-Touch.
2 Opening the update dialog
￭ Under System ▶ Diagnosis, tap on the button Software
update.