Metrohm 915 KF Ti-Touch - Manual (Page 315)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
28 Parameters
915 KF Ti-Touch
￭￭￭￭￭￭￭￭ 301
￭ Measuring point list
Definition of the method command to which the measuring point list is
to be printed.
￭ Calculations
Definition of the accuracy with which the variables used as well as the
results calculated are printed.
￭ Statistics short
Definition of the time at which the report is to be printed (with each
determination or only at the end of a sample series).
￭ Statistics overview
Definition of the time at which the report is to be printed (with each
determination or only at the end of a sample series).
￭ Sample table
￭ Result table
Definition of the time at which the report is to be printed (with each
determination, at the end of a sample series or at the end of the sam-
ple table).
￭ Used devices
￭ Variables
￭ Monitoring
28.5.3 List of reports
The following reports can be inserted in the command REPORT.
NOTE
If you are using a CUSTOM Neos printer, you can print only the
reports that are marked with a # on the display.
Report Contents
Result report Report with determination properties, sample data, calculated results,
etc. If there are multiple determinations, the statistics will also be prin-
ted out.
Curve Curve report.
Measuring point list Measuring point list report.
Calculations Details concerning the calculations carried out (parameter settings in
accordance with the CALC command and the calculated results).
Used devices The devices used for the determination, as displayed in the More
determination data / Properties dialog.
Variables All determination variables, as displayed in the results dialog.
Monitoring Details for the monitored quantities (STAT, DOS only).
Statistics