2 saving a method – Metrohm 915 KF Ti-Touch User Manual
Page 169
Advertising
■■■■■■■■■■■■■■■■■■■■■■
16 Methods
915 KF Ti-Touch
■■■■■■■■
155
16.2
Saving a method
If you modify method parameters, then you can save these as your own
method.
To save a method, proceed as follows:
1 Open the command sequence
■
In the main dialog, tap on [Edit parameters].
The command sequence of the method is displayed:
2 Modify/apply the method name
■
Tap on [Save method].
A method name will be suggested for new methods. If the
method has already been saved once, then the method name will
be displayed.
Apply the name:
Advertising