Aco (alarm cut off), Aco (alarm cut off) -5 – Carrier Access Network Device Axxius 800 User Manual
Page 105
Advertising
Axxius 800 - Release 2.2
5-5
CLI Commands
aco (Alarm Cut Off)
aco (Alarm Cut Off)
Use the aco command to activate the Alarm Cut Off, which opens the alarm relay contacts on
the back of the unit.
Syntax:
aco
Example:
aco
ACO LED
To turn off ACO, all alarms must be cleared, or the operator can reset the controller, which will
set the ACO back to the default (off) state.
Off
Normal mode. No alarms are being suppressed.
Yellow
Alarm cutoff active. One or more active alarms suppressed.
Advertising