Carrier Access Network Device Axxius 800 - Manual (Page 59)

Axxius 800 - Release 2.2 3-3
Electrical Installation and Cabling
Compliant Installation
Ferrite Beads
To be compliant with FCC Part 15 EMI limits with the Quad DS1 ADPCM service card
installed:
l Route alarm cables separate from the rear panel tip/ring cabling (wire wrap
pins).
l Install ferrite bead accompanying this card on the visible, audible and
environmental input alarm cable bundle
Ferrite beads shipped with Quad DS1 ADPCM card:
Ferrite Provided Part Number Intended For
1 large P/N 010-0051 Alarm cable