Carrier Access Network Device Axxius 800 - Manual (Page 353)

Axxius 800 - Release 2.2 5-253
CLI Commands
status
status (router-lan)
Use the status (router-lan) command to display the current Router status information.
Syntax: status {rtr_lan-addr)
Example: status 3:1
The example displays status of the Router card in slot 3.
> status 3:1
SLOT 3:
Status for TSR Card
Run Status: Running
PORT 1 RS-232
TELNET: UP
TRANSMIT: YES
RECEIVE: YES
PORT 2 RS-232
TELNET: UP
TRANSMIT: YES
RECEIVE: YES
PORT 3 RS-232
TELNET: UP
TRANSMIT: YES
RECEIVE: YES
PORT 4 RS-232
TELNET: UP
TRANSMIT: YES
RECEIVE: YES
{rtr_lan-addr}
The Router address is in the form {slot:port|slot "profile-name"}.
slot The slot number (1-8) that contains the Router card.
port Port number, or all.
profile-name Existing LAN identifier, enclosed in quotes.