Carrier Access Network Device Axxius 800 - Manual (Page 485)

Axxius 800 - Release 2.2 17-5
Low Speed Protection Card
Technical Specifications
Service Cards Supported
l Quad T1 Service Card (hardened)
l DS1/E1 Service Card (hardened)
l Quad DS1 ADPCM Service Card (hardened)
Management
l RS-232/V.24 asynchronous craft port
l 10Base-T Ethernet management port
l Command Line Interface (CLI) from both the local asynchronous port and remote
Telnet sessions
l Menu-driven configuration and management interfaces
l SNMP agent for use with SNMP-based Element Management Systems
Alarms
l Switchover to hot-standby card
l Switchback to normal
Power
l 2.5 W maximum
Environment
In addition to the systems environment requirements, the following applies to the
Low-Speed Interface Protection Relay card. For additional information see Installation
Environment on page 2-3.
l Operating temperature range of the card: -40
°
to 149
°
F (-40
°
to 65
°
C)
Physical
l Dimensions: 3.5 in. (H) x 0.75 in. (W) x 11.25 in. (D)
8.9 cm (H) x 1.9 cm (W) x 28.6 cm (D)
l Weight: 7.4 oz. (0.21 kg)