Controllers, Dual ds3 controller, Quad ds1 controller – Carrier Access Network Device Axxius 800 User Manual
Page 36: Service cards, Fxo service card, Isdn bri service card, Controllers -4, Dual ds3 controller -4 quad ds1 controller -4, Service cards -4, Fxo service card -4 isdn bri service card -4
1-4
Axxius 800 - Release 2.2
Base Platform
Controllers
Controllers
The Axxius 800 has two controllers available, one controller can support the system,
however with two controller (same type) the system is redundant.
Dual DS3 Controller
Features two DS3 ports with integrated 3/1/0 cross-connect matrix, providing non-
blocking connectivity between the DS3 Controller and any of the 8 service card slots.
Quad DS1 Controller
Features four DS1 ports with integrated CSUs and a built-in 1/0 cross-connect matrix,
providing full, non-blocking connectivity between the controller and any of the 8
service card slots.
Service Cards
All Service cards are hot-swapable and can be installed in any of the 8 service slots of
the Axxius 800 chassis, with the exception of the Low Speed Protection card, which
has a defined slot.
FXO Service card
The FXO service card is an 8 port Foreign Exchange Office (FXO) or Dial Pulse
Termination (DPT) line card. Delivers high-density provisioning of Direct Inward
Dialing (DID) or FX0 telephone services from T1 access circuits.
ISDN BRI Service card
The ISDN Basic Rate Interface (BRI) service card is available in a Dual, Quad or Octal
port option. The ISDN BRI service delivery interfaces enable delivery of high-density,
standards based, ISDN BRI services of T1 access circuits.