Carrier Access Network Device Axxius 800 - Manual (Page 285)

Axxius 800 - Release 2.2 5-185
CLI Commands
show
show (fxo)
The show (fxo) command displays the settings for FXOs.
Syntax: show {fxo-addr}
Example: show 7:1
The example shows settings for port 1 on the FXO card i slot 7.
> show 7:1
SLOT 7:
Settings for FXO: channel 1:
Type: VOICE
Signaling: LS
RxGain: -6 dB
TxGain: -3 dB
{fxo-addr}
In the form of {slot:port}.
slot Location of the FXO card, slot 1-8.
port Port number, range or "all".