Carrier Access Network Device Axxius 800 - Manual (Page 455)

Axxius 800 - Release 2.2 15-3
Terminal Server Router Card
Features
Features
l Enables remote management of cell site resources
l Supplies 4 selectable RS-232 synchronous or 10/100Base-TX Ethernet
connections per card
l Supports up to 8 Router cards per Axxius 800 chassis
- Multi-point networking with up to 24 WAN connections per router
- Each WAN connection can be provisioned with multiple DS0s
- Deliver more than 2 T1s bandwidth per Router card; up to 60 DS0s per Router
card
l Ensures high performance and feature expansion
l Enables management via menu-driven or CLI Router interface
l Supports packet filtering and Spanning Tree Protocol
l Allows network address and port translation (NAT, PAT)
l Enables multiple T1 facilities to function as a single IP WAN interface using
ML-PPP for bandwidth scalability beyond a single T1
l Supports Dynamic Host Configuration Protocol (DHCP)
l Delivers 3,700 packets per second throughput (64 byte packets)
Additional Features on a TSR Card with TBOS
l Decodes the TBOS protocol to recover the individual alarm data points
l SNMP traps based upon changes to monitored alarm conditions
l Supports SNMP traps and GETs for the monitored alarm data
l Daisy chain up to 8 TBOS displays off 1 TSR RS-232 port