Carrier Access Network Device Axxius 800 - Manual (Page 275)

Axxius 800 - Release 2.2 5-175
CLI Commands
show
show
The following show commands are linked to a detailed description of each command.
show (adpcm) show (router) ntp
show autoexit show (router) port
show (bri) show (router) ppp
show cclabels show (router) rip
show clock show (router) snmp
show connect show (router) stp
show connect adpcm show (router) syslog
show date show (router) uploaduser
show (ds0) show (router-lan)
show (ds1) show (router-lan) filter
show (ds3) show (router-lan) static
show ethernet show (router-lan) stp
show external alarms show (router-wan)
show (fxo) show (router-wan) firewall
show (fxsPS or fxsPSM) show (router-wan) nat bypass
show id show (router-wan) ppp
show image show (router-wan) static ip address
show impedance show (router-wan) static ip network
show ip show (router-wan) static ipx network
show ipds0 show (router-wan) static mac address
show login show (router-wan) static nat address
show lsprotect show (router-wan) stp
show ntp show (router-wan) trunk
show (ocudp) show screen
show radius show snmp
show (router) show syslog
show (router) dhcp show time
show (router) dns show users
show (router) lmi show (v35)
show (router) login show (v54)