Carrier Access Network Device Axxius 800 - Manual (Page 320)

5-220 Axxius 800 - Release 2.2
CLI Commands
show
show snmp
The show snmp command displays the SNMP settings.
Example: show snmp
SNMP Settings:
System Name:
System Location:
System Contact:
GET Community: public
SET Community: desktop
TRAP Community: public
Trap version: 0
Authentication TRAP disabled
Event TRAP none
NMS 1:
NMS 2:
NMS 3:
show syslog
The show syslog command displays settings for the system log.
Syntax: show syslog
Example: show syslog
Syslog Settings:
Syslog: Disabled
Server IP Address Facility Threshold Level
1 0.0.0.0 16 3
2 0.0.0.0 16 3
3 0.0.0.0 16 3