Carrier Access Network Device Axxius 800 - Manual (Page 462)

15-10 Axxius 800 - Release 2.2
Terminal Server Router Card
Card Configuration
l delete (router) static dns host
Delete a static DNS host record.
l delete (router) uploaduser
Remove an existing authorized uploaduser.
l delete (router-lan) filter
Remove a a single filter rule from the table of Layer 2 filters applied to the
specified LAN interface.
l delete (router-lan) secondary ip address
Delete a secondary IP address from the LAN interface.
l delete (router-lan) static
Remove a static element from the LAN interface.
l delete (router-wan) firewall
Remove a firewall rule from a WAN.
l delete (router-wan) gre network
Remove a "by network" GRE tunnel to a WAN.
l delete (router-wan) static
Delete a static element from the WAN interface.
l disconnect {slot:port:trunk}
Removes a connection created by the connect {trunk-addr}{t1-addr}
l install (slot) router
Will prepare the controller for the insertion of a new router card that will
keep its currently loaded configuration.
l load tftp
Will download software via TFTP to the Controller or the TSR card.
WARNING! B EFORE LOADING A DOWN - LEVEL OF R OUTER CODE TO AN
A DIT , SAVE THE CONFIGURATION TO A FILE . C ONFIGURATION MAY BE RESET TO
THE DEFAULT SETTING AND CURRENT CONFIGURATION LOST .
l rename (router) (router-wan/lan)
Change the name of a remote WAN or local LAN profile on the TSR card.