Carrier Access Network Device Axxius 800 - Manual (Page 416)

11-2 Axxius 800 - Release 2.2
Single Channel POTS Cards
Overview
Overview
A Single Channel POTS card provides wireless service
providers a standard FXS voice circuit for
communications, with the operations support group
under conditions where the cell site radios are being
serviced. The Single Channel POTS card features a
single RJ-11 telecom connection, and is available with
or without an integrated V.34 modem for remote
management of the Axxius platform over a dial-in
connection. These cards can be inserted into any service
card slot of the Axxius 800.
The integrated dial-in V.34 modem port connects the
remote technician to the Axxius DS3 or T1 Controller
card for remote CLI configuration. Additional local or
remotely management options are available for the
Service card as a component of the Axxius 800
platform. The card can be configured using CLI or via
or NetworkValet graphical interface.
Features
l Provides a lifeline order wire connection for
communications from the remote cell sites during
radio maintenance
l Offers solid-state overvoltage and fuseless
overcurrent protection from lightning and power
cross incidents