Carrier Access Network Device Axxius 800 - Manual (Page 463)

Axxius 800 - Release 2.2 15-11
Terminal Server Router Card
Card Configuration
l reset (router)
Reboot the Router. All new configuration since the last configuration will be
in-use.
l set (router) default
Reset the router to its default configuration settings, and will reboot.
l set (router) dhcp
Configure the DHCP functions.
l set (router) dns
Set the Domain Name Server options.
l set (router) enhanced security
Enable the enhanced logging security on the Router.
l set (router) lmi
Specify the Local Management Interface (LMI) protocol to use for the
Router.
l set (router) login auth
Define the login authentication type.
l set (router) login prompt
Enable and disable the login prompt.
l set (router) ntp
Set the Network Time Protocol parameters.
l set (router) password
Manage password access on the router.
l set (router) port
Set port characteristics on a Terminal Server Router card.
l set (router) ppp auth
Configure the Point-to-Point Protocol authentication on the router card.
l set (router) ppp security
Set up the local external security server that the router will use to
authenticate remote PPP devices.
l set (router) proxy
Configures Router in-use basics (up, down and proxy).