Carrier Access Network Device Axxius 800 - Manual (Page 147)

Axxius 800 - Release 2.2 5-47
CLI Commands
delete
delete (router) uploaduser
Use the delete (router) uploaduser command to remove an existing host that is allowed to
upload either the configuration or software files to the specified Router card.
Syntax: delete {rtr_card-addr} uploaduser
{all|ip-addr} {"profile-name"}
Example: delete 3 uploaduser "LosAngeles"
The example will remove any user for upload of a code file from the TSR
interface named "LosAngeles". The TSR is located in slot 3.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{all|ip-addr}
{"profile-name"}
The name of the remote WAN or LAN profile specified in the entry to be removed. This
name must be enclosed in quotes.
all Will delete all upload users.
ip-addr The IP address of the host, in the form of xxx.xxx.xxx.xxx, where xxx is
between 0-255.