Carrier Access Network Device Axxius 800 - Manual (Page 165)

Axxius 800 - Release 2.2 5-65
CLI Commands
rename (router)
print help
Print the complete help file to the screen.
Syntax: print help
Example: print help
This example would print the entire help text, which can be scrolled though with
Enter or Spacebar.
rename (router)
Use the rename (router) command to change the name of a local LAN or remote WAN profile
on the specified Router card. Profile names cannot contain spaces and must be unique on a
particular TSR card.
Syntax: rename {rtr_card-addr} {"old-profile-name"}
{"new-profile-name"}
Example: rename 6 "Chicago" "Milwaukee"
This example will change the name of the WAN profile from "Chicago" to
"Milwaukee", for the Router in slot 6.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"old-profile-name"}
The current LAN or WAN profile name. This name must be enclosed in quotes.
{"new-profile-name"}
The new profile name of a LAN or WAN profile. This name has a maximum length of 11
characters, and must be enclosed in quotes.