Delete (router) snmp trap, Delete (router) static dns host, Delete (router) snmp trap -46 – Carrier Access Network Device Axxius 800 User Manual
Page 146: Delete (router) static dns host -46
5-46
Axxius 800 - Release 2.2
CLI Commands
delete
delete (router) snmp trap
Use the delete (router) snmp trap command to delete a trap destination from the specified
Router card.
Syntax:
delete {rtr_card-addr} snmp trap
{"community-name"} {ip-addr}
Example:
delete 2 snmp trap "commune" 192.168.100.245
The example will delete the previously added SNMP community named
"commune" from the Router in slot 2.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"community-name"}
The name of an existing community. This name must be enclosed in quotes, with a
maximum of 12 characters.
{ip-addr}
The IP address of the destination trap to delete, in the form of xxx.xxx.xxx.xxx, where xxx
is between 0-255.
delete (router) static dns host
Use the delete (router) static dns host command to delete a static DNS host record.
Syntax:
delete {rtr_card-addr} static dns host
{ip-addr} {"domain-name"}
Example:
delete 2 dns host 192.168.100.245 "myhost.some.net"
Example will delete a DNS host entry with address 192.168.100.245 and
domain named "myhost.come.net" on the Router in slot 2.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{ip-addr}
The IP address of the host, in the form of xxx.xxx.xxx.xxx, where xxx is between 0-255.
{"domain-name"}
The domain name of the host with a maximum length of 41 characters, enclosed in quotes.