Carrier Access Network Device Axxius 800 User Manual
Page 294
Advertising
5-194
Axxius 800 - Release 2.2
CLI Commands
show
Spanning Tree Protocol Settings for Router:
Spanning Tree: Disabled
Syslog Settings for Router:
Syslog: Disabled
TFTP Upload/Download User Settings for Router:
Reboot After Code is Loaded: Yes
Reboot After Configuration is Loaded: Yes
Upload/Download
IP Address Client Site Code Config
Total: 0
LAN Profile Name for Router:
LocalUnit 10.0.0.1
WAN Profile Name(s) for Router:
RemoteUnit Unnumbered
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
Advertising