Carrier Access Network Device Axxius 800 - Manual (Page 354)

5-254 Axxius 800 - Release 2.2
CLI Commands
status
status (router-trunk)
Use the status (router-trunk) command to display the current status information for the
specified Trunk on the Router card.
Syntax: status {rtr_trunk-addr)
Example: status 3:1:1-4
> status 3:1:1-4
SLOT 3:
Status for TSR 1 Trunk 1:
Link Alarm: NO
SLOT 3:
Status for TSR 1 Trunk 2:
Link Alarm: NO
SLOT 3:
Status for TSR 1 Trunk 3:
Link Alarm: NO
SLOT 3:
Status for TSR 1 Trunk 4:
Link Alarm: NO
{rtr_trunk-addr}
The Router trunk address is in the form {slot:port:trunk}.
slot The slot number (1-8) that contains the Router card.
port Port number of the Router.
trunk Trunk number, a range or "all" can be used here. Port numbers are 1-24.