Show ip, Show ipds0, Show login – Carrier Access Network Device Axxius 800 User Manual
Page 289: Show ip -189, Show ipds0 -189, Show login -189
Advertising
Axxius 800 - Release 2.2
5-189
CLI Commands
show
show ip
The show ip command displays the IP Address information for the Axxius 800.
Syntax:
show ip
Example:
show ip
IP Address and Mask: 192.168.3.193 255.255.255.0
IP Address of the Gateway: 192.168.3.202
OK
show ipds0
The show ipds0 command displays the settings for the DS0 management channel.
Syntax:
show ipds0
Example:
show ipsd0
Administrative state: DOWN
DS0 Selected: a:1:1
IP Address and Mask: 192.168.210.1 255.255.255.0
show login
The show login
command displays the RADIUS login authentication configuration settings for
the Controller.
Syntax:
show login
Example:
show login
Login Authentication Parameters:
Authentication Type: local
Support Logins: enabled
Advertising