Carrier Access Network Device Axxius 800 - Manual (Page 467)

Axxius 800 - Release 2.2 15-15
Terminal Server Router Card
Card Configuration
l show (router-lan) filter
Displays the current LAN Layer 2 data filters applied to the LAN on the
router card.
l show (router-lan) static
Displays the current list of static entries for the LAN on the router card.
l show (router-lan) stp
Displays the current Spanning Tree Protocol settings for the specified LAN
interface.
l show (router-wan)
Displays the current configuration for the specified WAN.
l show (router-wan) firewall
Displays the current firewall filter settings for the specified WAN interface.
l show (router-wan) ppp
Displays the current PPP settings for the specified WAN interface.
l show (router-wan) static ip address
Displays the current list of static IP address entries for the specified WAN
interface.
l show (router-wan) static ip network
Displays the current list of static IP network entries for the specified WAN
interface.
l show (router-wan) static mac address
Displays the current list of static IP MAC address entries for the specified
WAN interface.
l show (router-wan) stp
Displays the current Spanning Tree Protocol settings for the specified WAN
interface.
l show (router-wan) trunk
Displays the current trunk assignments for the specified WAN interface.
l status (router)
Displays the current Router status information (alarms, DNS, events, IP
address table, IP network table, IPX network table, IPX server table, MAC
address table, performance, STP).
l status (router-lan)
Displays the current router status information.