Show (router-wan) static ip address, Show (router-wan) static ip network, Show (router-wan) static ip address -216 – Carrier Access Network Device Axxius 800 User Manual
Page 316: Show (router-wan) static ip network -216
5-216
Axxius 800 - Release 2.2
CLI Commands
show
show (router-wan) static ip address
The show (router-wan) static ip address command displays the current list of static IP address
entries for the specified WAN interface.
Syntax:
show {rtr_card-addr} {"wan-name"} static ip address
Example:
show 5 "LosAngeles" static ip address
> show 5 "LosAngeles" static ip address
SLOT 5:
WAN Static IP Address Settings for LosAngeles:
Total: 0
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
show (router-wan) static ip network
The show (router-wan) static ip network command displays the current list of static IP
network entries for the specified WAN interface.
Syntax:
show {rtr_card-addr} {"wan-name"} static ip network
Example:
show 5 "LosAngeles" static ip network
> show 5 "LosAngeles" static ip network
SLOT 5:
WAN Static IP Network Settings for LosAngeles:
Network Subnet Mask Metric Remote Tunnel Addr
200.1.1.0 255.255.255.0 1
Total: 1
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.