Carrier Access Network Device Axxius 800 - Manual (Page 287)

Axxius 800 - Release 2.2 5-187
CLI Commands
show
show image
The show image command displays the application images stored in the Controller or Router.
Syntax: show [rtr_card-addr] image
Example: show image
> show image
App. Image: Ver=7.0 Fri Aug 29 06:40:42 2003 - ACTIVE
App. Image: Ver=7.0 Thu Aug 14 13:01:18 2003 - BACKUP
Example: show 5 image
> show 5 image
SLOT 5:
App. Image: Ver=1.30K Fri Apr 09 11:53:13 2004 - ACTIVE
App. Image: Ver=1.21H Mon Mar 29 09:54:36 2004 - BACKUP
[rtr_card-addr]
The Router card slot number (1-8) to retrieve the image information from. Note: If no slot
number is entered, the image information is retrieved from the Controller.