Carrier Access Network Device Axxius 800 - Manual (Page 94)

4-22 Axxius 800 - Release 2.2
Configuration
Setup of DS0 Management Channel
2. Set the following on this screen:
Rename RemoteUnit (default name) to Axxius1.
Set WAN Networks Updates for IP to <Never>.
Set WAN IP: Numbered to <No>.
3. [T AB ] to Setup: <Static/VPN Networks > (scroll to this selection if it is
not displayed).
Note: if the IP Protocol is set to <Bridge > this option will not be
available.
4. Set Setup Static: to <IP Networks> (scroll to this selection if it is not
displayed)
5. Select [C TRL A] to add a Static IP Address.