Carrier Access Network Device Axxius 800 - Manual (Page 295)

Axxius 800 - Release 2.2 5-195
CLI Commands
show
show (router) dhcp
The show (router) dhcp command displays the current DHCP settings for the Router card.
Syntax: show {rtr_card-addr} dhcp
Example: show 5 dhcp
The following 3 examples, shows there is different information is displayed
depending on the settings.
> show 5 dhcp
SLOT 5:
DHCP Server/BOOTP Relay Agent Settings for Router:
DHCP: Disabled
> show 5 dhcp
SLOT 3:
DHCP Server/BOOTP Relay Agent Settings for Router:
DHCP/BOOTP Relay Agent: Enabled
BOOTP Relay Servers: 192.168.1.1 at RemoteUnit
0.0.0.0 at RemoteUnit
> show 5 dhcp
SLOT 3:
DHCP Server/BOOTP Relay Agent Settings for Router:
DHCP Server: Enabled
Server Domain:
Starting IP Address: 192.100.1.1
Number: 25
Lease Duration: 0:00
Domain Name Servers: 0.0.0.0
0.0.0.0
0.0.0.0
NetBIOS over TCP/IP Settings:
Node Type: 0
Scope:
NetBIOS Name Servers: 0.0.0.0
0.0.0.0
{rtr_card-addr}
The slot number (1-8) that contains the Router card.