Carrier Access Network Device Axxius 800 - Manual (Page 297)

Axxius 800 - Release 2.2 5-197
CLI Commands
show
show (router) lmi
The show (router) lmi command displays the current Local Management Interface (LMI)
settings for the Router card.
Syntax: show {rtr_card-addr} lmi
Example: show 5 lmi
The example shows the LMI settings for the Router card in slot 5.
> show 5 lmi
SLOT 5:
LMI Settings for Router:
LMI: Disabled
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
show (router) login
The show (router) login command displays the Router login configuration.
Syntax: show {rtr_card-addr} login
Example: show 1 login
SLOT 1:
Login Settings for Router:
Authentication: Local
Login Prompt: Enabled
{rtr_card-addr}
The slot number (1-8) that contains the Router card.