Carrier Access Network Device Axxius 800 - Manual (Page 349)

Axxius 800 - Release 2.2 5-249
CLI Commands
status
status (router) ipx network table
Use the status (router) ipx network table command to display the current table of learned
IPX Networks for the specified interface on the Router card.
Syntax: status {rtr_card-addr} ipx network table
["profile-name"]
Example: status 5 ipx network table
> status 5 ipx network table
ROUTER BLADE IPX NETWORKS REPORT Slot-5
Total Entries-4 on 1 Ports
Display: <IPX Networks> Learned From: <All Ports >
Network Hops Ticks Next IPX Router Port Name Frame Type
1. Static 00000011 2 4 LosAngeles 802.3
2. Static 00000011 2 4 LosAngeles 802.2
3. Static 00000011 2 4 LosAngeles SNAP
4. Static 00000011 2 4 LosAngeles Eth II
Example: status 5 ipx network table "Axxius50"
> status 5 ipx network table "Axxius50"
ROUTER BLADE IPX NETWORKS REPORT Slot-5
Total Entries-0 on Local LAN
Display: <IPX Networks> Learned From: <Local LAN >
Network Hops Ticks Next IPX Router Frame Type
No Records to Display...
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
["profile-name"]
The profile name for the Router interface that is used to reach this destination. Name must
be enclosed in quotes, with a maximum length of 11 characters.