Carrier Access Network Device Axxius 800 - Manual (Page 343)

Axxius 800 - Release 2.2 5-243
CLI Commands
status
status (ocudp) performance
Use the status (ocudp) performance command to display performance statistics for the current
15 minute interval, previous 15 minute interval, previous 1 hour interval, and for the previous
day.
Syntax: status {ocudp-addr} performance
Example: status 2:1 performance
> status 2:1 performance
SLOT 2:
Performance Statistics for OCUDP Port 1:
current previous
15 min. 15 min. 1 hour 1 day
----------- ----------- ----------- ----------
out of service seconds: 775 0 0 0
loss of frame seconds: 0 0 0 0
loss of signal seconds: 784 0 0 0
bipolar violations seconds: 0 0 0 0
elapsed time in current 15 min. interval: 13:27
valid 15 min. intervals in hour: 0
valid 15 min. intervals in Day: 0
{ocudp-addr}
The {slot:port} address of the OCU-DP card to display.
slot Slot number (1-8) where the OCU-DP is located
port Port number or range.