Carrier Access Network Device Axxius 800 - Manual (Page 360)

5-260 Axxius 800 - Release 2.2
CLI Commands
telnet
telnet
telnet (router)
Use the telnet (router) command to establish a Telnet session from the Axxius 800 CLI to the
Router card menu-driven user interface.
Syntax: telnet {rtr_lan-addr}
Example: telnet 3
The example will Telnet into a TSR in Slot 3.
> telnet 3
Connected.
Escape character is ’^]’.
Attempting Carrier Access Router connection...
Router [Wed Apr 24, 2002 13:00:15] (<CR> to login)
Password >******
Select a terminal type...
(<space> or <back-space> to toggle, <CR> to accept)
Terminal: <VT100>
{rtr_lan-addr}
The Router address is in the form {slot:port|slot "profile-name"}}.
slot The slot number (1-8) that contains the Router card.
port Port number of the Router.
profile-name Existing WAN identifier, enclosed in quotes.