IAI America XSEL-KE - Manual (Page 361)

346
Appendix
Axis-Specific Parameters
No. Parameter name
Default value
(Reference)
Input range Unit Remarks
93 Zone 3 MIN 0 -99999999 ~
99999999
0.001 mm Valid only when MAX > MIN. * Must be inside the range for
at least 3 msec.
94 Zone 3 output
number
 a   3K\VLFDORXWSXWSRUWRUJOREDOIODJ 2XWSXWLVLQYDOLGLI³´LV
LQSXW PXOWLSOHVSHFLILFDWLRQLVLQYDOLG  ³´FDQEHLQSXWLQ
PC software version 1.0.0.0 or later or TP application
version 1.06 or later)
95 Zone 4 MAX 0 -99999999 ~
99999999
0.001 mm Valid only when MAX > MIN. * Must be inside the range for
at least 3 msec.
96 Zone 4 MIN 0 -99999999 ~
99999999
0.001 mm Valid only when MAX > MIN. * Must be inside the range for
at least 3 msec.
97 Zone 4 output
number
0 0 ~ 899 Physical output port or global flag (Output is invalid if
³´LVLQSXW PXOWLSOHVSHFLILFDWLRQLVLQYDOLG  ³´FDQEH
input in PC software version 1.0.0.0 or later or TP
application version 1.06 or later)
98
~
118
(For expansion) 0 ~
119 FSG 0 0 ~ 100
120 FFF 10 0 ~ 100 * Change is prohibited unless instructed by the
manufacturer.
121
~
250
(For expansion) 0 ~