Conditional jump – IAI America XSEL-KE User Manual
Page 318
303
Appendix
21. Conditional Jump
Description
Select the destination of jump via GOTO by using the status of an external input, output or internal flag as
a condition.
The program waits for multiple inputs and performs a different processing depending on the received input.
Example of Use 1
,ILQSXWLV21WKHSURJUDPMXPSVWR³7$*´If input 10 is OFF, the program performs the next
processing.
Example of Use 2
The program waits for input at two input ports of 10 and 11 and if an input is received by 10, processing a
will be performed. If an input is received by 11, processing b will be performed.
If inputs 10 and 11 are both ON, processing a is performed.
Input 10
Processing a
TAG 1
Processing a
Processing b
If input 10 is ON,
H[HFXWH³*272´
* If input 10 is ON, processing a is skipped and
processing b is performed.
If input 10 is OFF, processing a is performed and then
processing b is performed.
Input 10
Input 11
Processing a
Processing b
Processing a
Processing b
No input.
Input 10 is ON.
Input 11 is ON.