2 led status displays – Festo Электромотор MTR-DCI User Manual
Page 115
Advertising
![background image](/manuals/464459/115/background.png)
6. Operating, maintenance and diagnosis
6-7
Festo P.BE-MTR-DCI-IO-EN en 1209d
6.2.2
LED status displays
The operating states are shown with 3 LEDs:
–
(POWER)
–
I/F (e.g. positioning status, controller enable)
–
ERROR
POWER
Status
Operating voltage applied.
green
Operating voltage not applied.
Check the operating voltage connection if necessary.
off
Tab. 6/2:
“Power LED”
ERROR
Status
Internal fault.
The motor unit is not ready to operate (deactivated).
red
No internal fault registered.
The motor unit is operational.
off
Tab. 6/3:
“Error” LED
Advertising