Festo Электромотор MTR-DCI User Manual
Page 55
Advertising
3. Installation
3-13
Festo P.BE-MTR-DCI-IO-EN en 1209d
Caution
Damage to the device
The DC 24 V voltage at pin 1 does not have any special
protection against overload; the voltage is taken from the
main supply with protection against ESD and incorrect
polarity.
•
Use this connection only for the reference switch
(sensor supply).
Use of this connection as a power supply for other devices
is not permitted.
The input for sensor signal REF complies in its electrical
features with the input specification in the appendix
“Technical specifications”.
Advertising