Festo Электромотор MTR-DCI - Manual (Page 37)

2. Mounting
2-3
Festo P.BE-MTR-DCI-IO-EN en 1209d
2.1 General instructions
Warning
Electric shock
Before carrying out mounting, installation and mainten-
ance work, always switch off the power supply for the elec-
tronic components.
Note
Handle all modules and components with great care.
Please note especially the following:
– Screw connections must be fitted free of offset and
mechanical tension. Screws must be fitted accurately
(otherwise threads will be damaged).
– The specified torques must be observed.
– The modules must not be offset.
– Contact surfaces must be clean (avoid contact faults).