Festo Электромотор MTR-DCI - Manual (Page 64)

MTR-DCI...
X
a
= 0.00 mm
HMI:off
<Menu>
}
Diagnostic
positioning
Settings
S
ESC <Menu>
<--> OK <Enter>
}
HMI control
LCD adjustment
v
ESC <Menu>
<--> OK <Enter>
4. Control panel (MTR-DCI-...-H2IO)
4-6
Festo P.BE-MTR-DCI-IO-EN en 1209d
4.2 The menu system
4.2.1 Accessing the main menu
When the power supply is switched on, the MTR-DCI auto-
matically carries out an internal check. At first the display
briefly shows the Festo Logo then changes to the status
display. The status display shows the following information:
– the type designation of your MTR-DCI
– the current position of the drive x a = ...
– the current setting of the device control
(HMI = Human Machine Interface)
The main menu is accessed from the status display with the
button <Menu>. The current button function will be displayed
in the lower lines of the LCD display.
Function Button
<- -> With the arrow buttons on the control panel you
can select a menu item from the list. The current
selection is marked with an arrow (
} Dia-
gnostic). Select the menu item S in order to
display further menu items (HMI control...).
v
V
ESC With <Menu> you can interrupt the current entry
and return in stages to the higher-order menu
level or status display.
Menu
OK With <Enter> you can confirm the current
selection or entry.
Enter
Tab. 4/2: Button function (menu selection)