Festo Электромотор MTR-DCI - Manual (Page 86)

5. Commissioning
5-8
Festo P.BE-MTR-DCI-IO-EN en 1209d
Axis type Feed constant
[mm/revolution] Measuring
system
Festo positioning
axis
1) 2)
DMES-18 1.5 Metric 3)
DMES-25 2.5
DMES-40 4
DMES-63 6
Rotation axis — Degree or
revolutions
Linear axis 2) According to the type
plate or technical
specifications of the
axis Metric 3)
1) Values defined at factory Z spindle pitch of the axis [mm]
2) If an external gear is used, the gear factor can be set with
FCT.
3) Pre-setting metric; inches can only be set with FCT
Tab. 5/2: Parametrizing the axis