Festo Электромотор MTR-DCI - Manual (Page 78)

4. Control panel (MTR-DCI-...-H2IO)
4-20
Festo P.BE-MTR-DCI-IO-EN en 1209d
Function
EMERG.
STOP With <Menu> you can interrupt the positioning
procedure (
> Error mode EMERG.STOP; con-
firm with <Enter>, then automatic return to
the status display).
Menu
DEMO
STOP With <Enter> you can interrupt the positioning
run “Pos set table” [Demo pos tab].
The current positioning set will be processed
before the axis stops. A new start will be
made with position set 0.
Enter
4.2.5 Menu command [HMI control]
For selecting the menu commands [Positioning] and [Settings]
you will require the setting “HMI: on”. Only then is the
MTR-DCI ready to process user entries on the control panel.
When selecting the menu commands, you will be requested
to modify the HMI setting.
[HMI control] You can also modify the setting directly with the menu
command [HMI control].
HMI
1)
Device control
on The device control is carried out manually via the control
panel. The control interface of the MTR-DCI is deactivated
and the control enable is set. The actual status of the
ENABLE input then has no effect.
off The device control is carried out via the control interface
of the MTR-DCI.
1)
Human Machine Interface