Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 148)

Extraction
Ascent Xtrata Pro User's Guide 129
X To locate an item only on the first page
1 Open the Properties dialog box for the locator.
2 Select the Regions tab.
3 Make sure that All pages is not selected.
4 Select Enable locator for First page.
X To identify an item only in the lower 40% of the last page (e.g. to locate a
banking account on an invoice)
1
Open the Properties dialog box for the locator.
2 Select the Regions tab.
3 Clear the check mark in All pages if it is selected
4 Select Enable locator for Last page.
5
Click Add. (If a document is open in the Document Viewer, the region
displays on the last page.)
6
Set Top to 60%, Width to 100%, and Height to 40%. Watch how the region
changes in the Document Viewer while you adjust the values. You can also
manually drag the region’s boundaries in the Document Viewer to achieve
the desired values.
Testing Locators
You can test a locator from its Properties dialog box. Just click the Test button. The
results display on the Test Results tab. If a document is open in the Document
Viewer, the results display there, too.