Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 318)

Project Builder User Interface
Ascent Xtrata Pro User's Guide 299
Otherwise, the class name will be excluded from the list and the operator will not
be able to assign it as the classification result.
Note
If a document is classified to a “non-visible” class, then this class will
appear in the list of classes for this document despite its non-visible status.
Extract this class with the external server
This option is not selected by default. If this option is selected, Ascent Xtrata Pro
Server performs extraction for the class, but does not save the field results in
Ascent Capture.
During publishing, a warning is shown if the project contains a class for which
extraction is performed by a server other than Ascent Xtrata Pro Server.
Warning
f you are using an external server, it is recommended that you not use
Ascent Xtrata Pro Validation
Redirection
All documents assigned to this class can be forced into another class. To apply this
type of redirection, select a destination class from the list.
Subtree classification
If this option is selected, subtree classification will be enabled. This means that a
document can be assigned to a subclass. Once selected, you can set the minimum
confidence and minimum distance values.
Subtree classification via parent class required
When the option “Subtree classification via parent class required” is selected,
then a class can only be a valid classification result when the subtree
classification was performed for a parent class that is selected from the list.
Document Separation
Batches may contain single page or multi-page documents, or a combination of both,
or loose pages. Document separation processes multi-page documents to split them
to separate documents according to the settings, if necessary.
If document separation is activated then all loose pages of a batch are added to one
multi-page document that will be processed by document separation. In the first
step, document separation is performed on a multi-page document, and in the
second step, classification is performed for the batch that contains the newly created