Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 166)

Extraction
Ascent Xtrata Pro User's Guide 147
• -Zoom in, zoom out, fit to viewer, fit to width
• - Select document set
• - Help
Barcode Locator
The following sections describe the concept of the Barcode Locator and show how to
add and set up the locator.
Concept
Some documents contain bar codes that are usually attached to a form during the
scanning process. With the Barcode Locator any bar code present on the document is
detected and decoded. The detected values can be assigned to a field. The Barcode
Locator can locate the most common bar code types automatically, even if the bar
codes are rotated. Sometimes, document quality requires making a few manual
settings.
Properties
The following sections describe how to set up the Barcode Locator . In most cases, the
default settings are sufficient. However, it can be useful to restrict bar codes to
certain types and/or lengths to avoid errors or if multiple bar codes might be present
on the document.
X To add and configure a Barcode Locator
1 For an existing project, select any class in the project class hierarchy.
2 Select Show Extraction Design from the Mode toolbar.
3 Create a new locator and select Barcode Locator from the drop-down list of
locator methods.
4
Double-click on the new Barcode Locator in the list to open the Barcode
Locator properties dialog box.
For more information, see Project Builder User Interface - Barcode Locator
Properties Dialog Box.