Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 203)

Chapter 4
184 Ascent Xtrata Pro User's Guide
6
Select the zones that should be used for voting. The dialog displays a list with
three columns. The first columns displays the subfields in the locator that are
used as first input, the second column contains the reference to the second
input field. The third column contains the field name that is given to the
subfield of the evaluator.
Figure 4-50. OCR Voting Evaluator Properties - General Tab
7
Click on the first column to open a list of available subfields from previously
defined Advanced Zone locators, and select a subfield to be used as an input
locator.
8
Click on the second column and select the second subfield. This subfield will
be compared to the first subfield.
9
Click on the item in “Field Name” to edit the default field name.
10
Use the sliders below the two columns to adjust the minimal confidences that
should be used for accepting results from the alternatives from each locator.
Any character result above the confidence will be used as an alternative for
the voting evaluation. Since the recognition engines are not completely
normalized that means they use internally different setting values and the