Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 537)

Chapter 7
518 Ascent Xtrata Pro User’s Guide
When the synchronized batch class is published, the classification and extraction
project data is processed in the same way as all other batch class data to provide a
stable set of settings for existing batches.
Adding Ascent Xtrata Pro to a Batch Class
Ascent Xtrata Pro Server can be added to any Ascent Capture batch class. Normally,
Ascent Xtrata Pro Server should be positioned right after the Scan module in the list
of queues. It can be used in place of the Ascent Capture Recognition Server. Ascent
Capture’s OCR Full-Text processing is not required in the batch class since Ascent
Xtrata Pro Server performs its own OCR processing.
Once Ascent Xtrata Pro Server is added to a batch class, the “Synchronize Ascent
Xtrata Pro Project” menu item becomes available in the context menu for the batch
class.
The procedure below describes how to add Ascent Xtrata Pro Server to an existing
batch class. Refer to your Ascent Capture documentation for details about creating
batch classes.
X To add Ascent Xtrata Pro Server to an existing batch class
1
From the Administration module’s Definitions panel, select the Batch tab.
2 Right-click the batch class to which you want to add Ascent Xtrata Pro
Server.
3
From the context menu, select Properties to display the Batch Class
Properties dialog box.
4
Select the Queues tab.
5
Select Xtrata Pro Server from the list of Available Queues and click Add to
move it to the list of Selected Queues. It should appear after Scan in the list.
Xtrata Pro Server should appear in the list before Xtrata Pro Validation (if it
is in the list).
Note
Ascent Xtrata Pro custom modules are registered during installation. If
they are installed but not in the list of Available Queues for the batch class,
the registration might have failed. You can try to register them manually