Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 48)

Project Builder
Ascent Xtrata Pro User's Guide 29
Figure 2-6. Save Project As Dialog Box
To change the name of the project file select the Name text box and enter a name for
the new project file. Click the folder icon to navigate to a different folder and click
OK. The text at the bottom of the dialog box shows the new project file name and the
complete path to its new location.
Project Properties
The Project Properties dialog box allows you to insert a project description or assign
read and/or write protection to the project file.
The Project Settings dialog box contains several tabs that allow you to configure a
variety of global settings such as document separation and classification rules.
Project Properties
Select File | Project Properties from the main menu to display the dialog box.
Description
You may add a description to the project. This description is then visible within
the Synchronization tool.
Password Protection
A project file may be read and/or write protected.
If you read protect your project file, you will have to enter the read protection
password in the text field to load the project. If you provide the wrong password
or click Cancel, the project will not open. If you did not set a write protection