Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 541)

Chapter 7
522 Ascent Xtrata Pro User’s Guide
Open Synchronization Tool
You can open the Synchronization tool from the context menu of any batch class that
includes Ascent Xtrata Pro Server.
X To open the Synchronization tool
1
From the Administration module’s Definitions panel, select the Batch tab.
2
Right-click a batch class that includes Ascent Xtrata Pro Server to display a
context menu.
3 Select “Synchronize Xtrata Pro Project” to open the Synchronization tool.
If this is the first time you have synchronized this batch class, the Open
dialog box is displayed so you can select a project file (*.fpr). Subsequently,
the assigned project is automatically loaded each time you open the
Synchronization tool.
If synchronization has already been performed, the current synchronization
definitions are shown so that you can change them if necessasry. Remember
that you have to republish to pass the changes to Ascent Capture
If synchronization has already been performed for a batch class, but for some
reason the assigned project file can not be loaded, the Synchronization tool
shows the following Classification Project panel
Select Load Project from the main menu, then a message is shown.