Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 270)

Ascent Xtrata Pro User's Guide 251
Chapter 6
Project Builder User Interface
Introduction
This chapter provides details on the Ascent Xtrata Pro Project Builder user interface.
User Interface Elements
The Ascent Xtrata Pro Project Builder has a main menu and a toolbar for quick access
to project configuration tasks. Below these, the interface is divided into two main
sections. The left section has a panel showing the project structure, and the section to
the right has two panels arranged with one above the other.
The panel on the left changes, depending on the type of project (standard or invoice)
you are setting up. Both panels to the right provide a toolbar to access various
working and viewing modes. At the bottom of the interface a status bar provides
status information for the user.
For invoice projects, the main user interface changes to reflect the restricted
functionality that is implicit to that type of project. The most significant change is in
the Project panel, which provides quick access to the working modes provided for
invoice projects.
Note that you need special licensing to be able to create invoice projects.
Initial View
When you open a project, the initial view shows the class hierarchy to the left, the
classification result working mode in the upper right panel and the test folder in the
lower right panel.