Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 521)

Chapter 6
502 Ascent Xtrata Pro User's Guide
Selection Mode – used to select zones in the viewer
window. If you double-click a zone, the properties
dialog box will display.
Add Text Zone – used to draw an OCR text zone on the
reference document.
Add OMR Zone – used to draw an OMR zone on the
reference document.
Remove Background – used to perform background
removal for the document. Note that besides the
reference document, at least four additional sample
documents are required before you can perform
background removal.
Zoom In.
Zoom out.
Best Fit – used to automatically size the document so
that it fits entirely within the viewer.
Document Source - used to select the type of document
you want to view. Select Reference Document, Sample
Documents, or Test Documents. Use Reference
Document to add zones. Use Sample Documents to
check the zone position for other documents. Use Test
Documents to test the settings.
Help – view the online Help topic for this dialog box.
Invoice Locator Properties Dialog Boxes
The following invoice locator properties dialog boxes are available:
• Amount Group Locator
• Invoice Group Locator