Kofax Getting Started with Ascent Xtrata Pro - Manual (Page 510)

Project Builder User Interface
Ascent Xtrata Pro User's Guide 491
To use this feature properly, you should use the line item in the table that has the
most rows as the master item. Then flag as optional those rows which are not present
in the other line items in the table.
Table Locator Properties Dialog Box – Cells Tab
Use the Cells tab to divide the master item into individual columns (cells). This tab is
only enabled if you have selected the Manual detection method.
Figure 6-128. Table Locator Properties – Cells Tab
Model Column Mapping
This area lists the table columns based on the table model. The check mark indicates
which columns have been defined for this line item. Undefined columns will not be
recognized by the table locator.
To define a column, select one from the list, and then draw a box around it in the
Cells area. A check mark will appear, indicating that the column has been defined.
Cell Settings